Desktop speaker stand for Edifier S350DB
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Basic speaker stand for Edifier S350DB bookshelf speakers
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Basic desktop speaker stand for Edifier S350DB bookshelf speakers, nothing existed for what I wanted so I quickly threw this together.
This raises the speakers 130mm off the surface but I may revise this and make them taller as they aren't quite where I want.
I printed these in PLA and they've been fine though I would recommend at least 30% gyroid infill, possibly even more than that - despite their size, the speakers are really heavy and the first print which was at 20% infill just wasn't stable enough with the weight on it.
I printed with 5 top and bottom shell layers and 5 wall loops at 0.20mm layer height, though if you want them to present better, I'd use a smaller layer height as the curves are a little stepped at that height.