HP 75D RAM Memory Module Snap Fit Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed snap fit case for a DIY HP 75D RAM memory module. No glue or screws required.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Description
This is a custom 3D printed case for a DIY RAM memory module / cartridge for the HP 75D.
The case is designed as a snap fit / clamp fit enclosure. It does not require glue or screws. The two printed parts simply press together and hold firmly when assembled.
The memory module connector and electronic parts can be found on eBay or similar online marketplaces. This project is intended for hobby use, repair, restoration, and experimenting with vintage HP handheld computers.
Main features
Custom case for a DIY HP 75D RAM memory module
Snap fit / clamp fit design
No glue required
No screws required
Simple two part enclosure
Designed for hobby electronics and vintage computer restoration
Clean and practical replacement-style housing
Assembly
The case consists of 2 printed parts:
Top cover
Bottom cover
After assembling the RAM memory module and connector, place the electronics inside the printed case and press the two parts together until they lock into place.
The fit is designed to be firm, so the case should hold together well during normal use.
Notes
This is not an official HP product. It is a custom 3D printed enclosure for hobby and restoration use.
The electronics, RAM components, and connector are not included in the 3D model files. This upload includes only the printable case parts.
Some electronics work may be required to build the complete memory module.
If you need help building it or cannot make it yourself, feel free to contact me by email:
[email protected]
The model was designed from scratch in Autodesk Fusion 360.
Print settings
Recommended material: PLA, PLA+, or PETG
Layer height: 0.2 mm
Infill: 20–30%
Walls/perimeters: 3 or more
Top/bottom layers: 4 or more
Supports: not usually required, depending on print orientation
For best snap fit results, make sure your printer is well calibrated.