Apple Desktop Bus (ADB) to USB Dongle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this adapter for my Apple Extended Keyboard. The goal was to create an ADB to USB adapter that would not…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 1028
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I designed this adapter for my Apple Extended Keyboard. The goal was to create an ADB to USB adapter that would not require me to modify my keyboard in anyway. The only vintage computer part that was harmed in the making was a spare ADB cable I had lying around.
Assembly instructions can be found on hasu@tmk's GitHub page (see link below). Without his firmware, my Apple Keyboards would still be in storage collecting dust.
Parts List:
- Teensy 2.0 Microcontroller
- 1-10 kOhm resistor x1
- Self-Tapping Plastic Screw x 4
- A ADB cable (this will need to be cut and spliced for the adapter)
- 3D Printed Housing (found on this page!)
Firmware & Instructions:
The firmware and assembly instructions can be found on hasu@tmk's GitHub page. See the following link below:
https://github.com/tmk/tmk_keyboard/blob/master/converter/adb_usb/README.md
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2.5
Rafts:
Yes
Supports:
No
Resolution:
0.15 mm
Infill:
20%
Filament: Hatchbox ABS Grey
Category: Computer