SleepPhaser – clip-on reading lamp holder (bed & wall)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for a small reading lamp that clips onto a bed frame or mounts to a wall. 3 mount options.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Interactive 3D assembly guide (choose your mount, step-by-step, with an exploded view):
https://www.happy-electronics.eu/sleepphaser-guide/index.html?from=printables
SleepPhaser is a 3D-printable holder for a small reading lamp that clips onto a bed frame or mounts to a wall.
You always print 3 parts: the lamp holder + one of three mounts + the screw.
Parts (STL):
SleepPhaser_1_lamp-holder – lamp holder ring with a T-rail
SleepPhaser_2_mount-side – clamp for the side of the bed frame (uses the screw)
SleepPhaser_2_mount-top – clamp for the top / headboard (uses the screw)
SleepPhaser_2_mount-wall – wall mount (two screw holes, no screw needed)
SleepPhaser_3_screw – large knurled clamping screw
Assembly: the lamp holder slides into the mount's groove via the T-rail until it stops. For the side and top mounts the knurled screw clamps against the furniture; the wall mount is fastened with wood screws.