SleepPhaser – clip-on reading lamp holder (bed & wall)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial
Interactive 3D assembly guide (choose your mount, step-by-step, with an exploded view):
https://www.happy-electronics.eu/sleepphaser-guide/index.html?from=printables
SleepPhaser is a 3D-printable holder for a small reading lamp that clips onto a bed frame or mounts to a wall.
You always print 3 parts: the lamp holder + one of three mounts + the screw.
Parts (STL):
SleepPhaser_1_lamp-holder – lamp holder ring with a T-rail
SleepPhaser_2_mount-side – clamp for the side of the bed frame (uses the screw)
SleepPhaser_2_mount-top – clamp for the top / headboard (uses the screw)
SleepPhaser_2_mount-wall – wall mount (two screw holes, no screw needed)
SleepPhaser_3_screw – large knurled clamping screw
Assembly: the lamp holder slides into the mount's groove via the T-rail until it stops. For the side and top mounts the knurled screw clamps against the furniture; the wall mount is fastened with wood screws.