1 / 3
SMSL SA100 bluetooth amplifier flush wood rack mounting bracket insert
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small surround piece which allows your SMSL SA100 to be mounted flush into a piece of wood or rack surface.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 329
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
The images show it mounted into a piece of carboard…. but it will get mounted into a piece of wood as soon as I get further along on this record cabinet restore…
This can be printed with no supports as is (face down).
If instead you want to use the ‘ironing’ feature on the front/top surface (e.g. in Cura), you can also print this face up using supports. I used tree supports in Cura for the print shown!
- cut a 67x67mm square hole into whatever wood/panel/etc. you are mounting it to
- insert the mounting bracket, mark and drill pilot holes, and screw it into place using 4x ‘5x3/4’ socket head wood/metal screws
- insert SMSL SA100 from the back, ensuring that the rubber ‘nub’ legs are inserted into the 2 curved slots
- Tighten a couple zipties put together around the track on the underside, ensuring that the tie is firmly wedged under the rubber ‘nubs’ (that is what keeps the unit in position)
- Enjoy!