ASUS Ascent GX10 / DGX Spark — 10" Rack Mount (1.5U, horizontal) — Parametric Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric 10" rack mount tray for ASUS Ascent GX10 — raised to 55 mm so the taller GB10 box fits. Editable FreeCAD.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 113
- Wydruki
- 1
- Wyświetlenia
- 673
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
A parametric remix of the "Nvidia DGX Spark - 10in rack mount" by Dan Marchenkov, re-worked so a taller ASUS Ascent GX10 (GB10) fits — it does not fit the original tray.
Both parts (the main tray and the backing plate/bracket) were reverse-engineered from the original STLs into fully parametric FreeCAD models — every dimension is a named variable, so you can re-tune it and re-export.
WHAT'S CHANGED vs THE ORIGINAL
• Parametric source — the original ships as STL only; both parts are now clean parametric FreeCAD models + build scripts.
• Taller interior clearance (the reason for this remix) — front-opening height raised from ~51 mm to 55 mm (parameter interior_clearance), tray ~3.85 mm taller, so the taller ASUS Ascent GX10 fits.
• Redesigned backing plate — two raised rear corner posts with small triangular retaining lips (~0.5 cm²) at the same height as the front lip, holding the device down at the rear corners. Lips are braced by organic side-wall fill (never intrude into the device bay);
pointed front corners rounded.
• Foot landing pads — the floor vent grid is left solid under the device's four Ø14.5 mm rubber feet, so each foot stands on solid material (the 4 corner vents are filled; ~1 mm clearance to the nearest hole). Foot positions are parameters.
KEY DIMENSIONS (mm)
• 10" rack width: 254 • Face plate height: 61 (ears 9.525–70.525)
• Interior clearance: 55 (= max device height; parameter interior_clearance)
• Tray depth: 153.8 • Plates/floor/walls: 3 mm thick
• Front opening: 150.8 × 55, chamfered • Vent floor: 14 hex holes (4 corner vents left solid as foot pads)


• Ear mounting slots: 2 × 4 obround (12.18 × 6.2)
• Backing: U-bracket, 2 mm walls, 4× Ø2.0 bores for 2 mm self-tapping screws (co-axial with the tray)
WHAT TO PRINT
• 1× main tray • 1× backing plate
• Hardware: 2 mm self-tapping screws to attach the backing plate (as in the original)
PRINT NOTES
• Orient standing on the face plate (front), as in the original.
• Original printed in ABS; PETG is fine. Suggested 3+ perimeters, 0.2 mm layers.
FILES
• STL (print) • STEP (universal CAD) • FreeCAD-parametric: .FCStd + build scripts (edit the P{} dict and regenerate)
LICENSE
Original by Dan Marchenkov is CC0 (Public Domain), so this remix can carry any license — attribution kept as a courtesy.