ASUS Ascent GX10 / DGX Spark — 10" Rack Mount (1.5U, horizontal) — Parametric Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric 10" rack mount tray for ASUS Ascent GX10 — raised to 55 mm so the taller GB10 box fits. Editable FreeCAD.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 113
- Makes
- 1
- Views
- 673
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
A parametric remix of the "Nvidia DGX Spark - 10in rack mount" by Dan Marchenkov, re-worked so a taller ASUS Ascent GX10 (GB10) fits — it does not fit the original tray.
Both parts (the main tray and the backing plate/bracket) were reverse-engineered from the original STLs into fully parametric FreeCAD models — every dimension is a named variable, so you can re-tune it and re-export.
WHAT'S CHANGED vs THE ORIGINAL
• Parametric source — the original ships as STL only; both parts are now clean parametric FreeCAD models + build scripts.
• Taller interior clearance (the reason for this remix) — front-opening height raised from ~51 mm to 55 mm (parameter interior_clearance), tray ~3.85 mm taller, so the taller ASUS Ascent GX10 fits.
• Redesigned backing plate — two raised rear corner posts with small triangular retaining lips (~0.5 cm²) at the same height as the front lip, holding the device down at the rear corners. Lips are braced by organic side-wall fill (never intrude into the device bay);
pointed front corners rounded.
• Foot landing pads — the floor vent grid is left solid under the device's four Ø14.5 mm rubber feet, so each foot stands on solid material (the 4 corner vents are filled; ~1 mm clearance to the nearest hole). Foot positions are parameters.
KEY DIMENSIONS (mm)
• 10" rack width: 254 • Face plate height: 61 (ears 9.525–70.525)
• Interior clearance: 55 (= max device height; parameter interior_clearance)
• Tray depth: 153.8 • Plates/floor/walls: 3 mm thick
• Front opening: 150.8 × 55, chamfered • Vent floor: 14 hex holes (4 corner vents left solid as foot pads)


• Ear mounting slots: 2 × 4 obround (12.18 × 6.2)
• Backing: U-bracket, 2 mm walls, 4× Ø2.0 bores for 2 mm self-tapping screws (co-axial with the tray)
WHAT TO PRINT
• 1× main tray • 1× backing plate
• Hardware: 2 mm self-tapping screws to attach the backing plate (as in the original)
PRINT NOTES
• Orient standing on the face plate (front), as in the original.
• Original printed in ABS; PETG is fine. Suggested 3+ perimeters, 0.2 mm layers.
FILES
• STL (print) • STEP (universal CAD) • FreeCAD-parametric: .FCStd + build scripts (edit the P{} dict and regenerate)
LICENSE
Original by Dan Marchenkov is CC0 (Public Domain), so this remix can carry any license — attribution kept as a courtesy.