Sidewinder Flip Blade With Lock (0.25 sec open time)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A nice little project I made, based off of the sidewinder from Craighill. This knife does lock in the open and closed.
- Ocena
- 0 / 5
- Polubienia
- 60
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 1186
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
+=+=+=+=+=+=+=+=+=+=+=++=+=+=+VERY IMPORTANT+=+=+=+=+=+=+=+=+=++=+=+=+=+=+=+=+
Print the Keyring part with a 0.2mm nozzle instead of a 0.4mm
The following hardware is required.
4x M3x12mm Bolts
3x 3mm x 8mm x 4mm Deep groove Bearings
8x M3 Washers
============================== AMAZON LINKS ===================================
Bearings >>> https://www.amazon.com/dp/B07FVYPMPX?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1 ($10)
================================================================================
The knife weighs ~50g with the metal blade in it.
Use a piece of 1.75mm filament for the lock, push it in and out of the lock slot to lock and unlock.