Sidewinder Flip Blade With Lock (0.25 sec open time)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A nice little project I made, based off of the sidewinder from Craighill. This knife does lock in the open and closed.
- Rating
- 0 / 5
- Likes
- 60
- Downloads
- 91
- Makes
- 0
- Views
- 1,186
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
+=+=+=+=+=+=+=+=+=+=+=++=+=+=+VERY IMPORTANT+=+=+=+=+=+=+=+=+=++=+=+=+=+=+=+=+
Print the Keyring part with a 0.2mm nozzle instead of a 0.4mm
The following hardware is required.
4x M3x12mm Bolts
3x 3mm x 8mm x 4mm Deep groove Bearings
8x M3 Washers
============================== AMAZON LINKS ===================================
Bearings >>> https://www.amazon.com/dp/B07FVYPMPX?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1 ($10)
================================================================================
The knife weighs ~50g with the metal blade in it.
Use a piece of 1.75mm filament for the lock, push it in and out of the lock slot to lock and unlock.