1 / 3
One Piece Portgas D. Ace Hat Charms Smileys — zdjęcie 1
1 / 3

One Piece Portgas D. Ace Hat Charms Smileys

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Portgas D. Ace's Hat Charms from One Piece for cosplay

Ocena
0 / 5
Polubienia
3
Pobrania
40
Wydruki
0
Wyświetlenia
84
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I created Portgas D. Ace's Hat Charms from One Piece for cosplay. It is preferable to print them with a printer with multi colour capabilities. Enjoy!



Print settings:

0.2mm layer height

10% infill

4 top and bottome layer

2 walls

ironing (optional)



Optional embedded safety pin integration instructions:

I have included the file “Safety pin negative.stl” that can be imported as a negative part to embed a safety pin to turn them into pins. The pins must be under 35mm in length and 10 mm in width.

  • Import negative part

  • Place at desired location

  • Add pause at layer 8 (assuming 0.2mm layer height)

  • During printing, when the printer pauses insert safety pins in pockets

  • Make sure that the non-opening side is placed into the slot

  • Continue printing

  • Success



Be careful with the safety pins’ orientation. The part that doesn’t open should be placed into the slot that gets incased in plastic. Otherwise, it won’t work. Add the pause on layer 8 because the opening is smaller and the fit is a bit tigheter. It’s probably not a problem on CoreXY machines, but for bedslingers like mine, the printer flung the safety pin when I paused on layer 7 due to the movement of the bed and the wide opening.



Project files for Anycubic Kobra 3 include for referense.

Tagi