1 / 3
One Piece Portgas D. Ace Hat Charms Smileys — image 1
1 / 3

One Piece Portgas D. Ace Hat Charms Smileys

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Portgas D. Ace's Hat Charms from One Piece for cosplay

Rating
0 / 5
Likes
3
Downloads
41
Makes
0
Views
91
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

I created Portgas D. Ace's Hat Charms from One Piece for cosplay. It is preferable to print them with a printer with multi colour capabilities. Enjoy!



Print settings:

0.2mm layer height

10% infill

4 top and bottome layer

2 walls

ironing (optional)



Optional embedded safety pin integration instructions:

I have included the file “Safety pin negative.stl” that can be imported as a negative part to embed a safety pin to turn them into pins. The pins must be under 35mm in length and 10 mm in width.

  • Import negative part

  • Place at desired location

  • Add pause at layer 8 (assuming 0.2mm layer height)

  • During printing, when the printer pauses insert safety pins in pockets

  • Make sure that the non-opening side is placed into the slot

  • Continue printing

  • Success



Be careful with the safety pins’ orientation. The part that doesn’t open should be placed into the slot that gets incased in plastic. Otherwise, it won’t work. Add the pause on layer 8 because the opening is smaller and the fit is a bit tigheter. It’s probably not a problem on CoreXY machines, but for bedslingers like mine, the printer flung the safety pin when I paused on layer 7 due to the movement of the bed and the wide opening.



Project files for Anycubic Kobra 3 include for referense.

Tags