1 / 3
Surebonder Cordless Hot Glue Gun Upgraded Stand - Gridfinity — zdjęcie 1
1 / 3

Surebonder Cordless Hot Glue Gun Upgraded Stand - Gridfinity

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An upgraded stand for the Surebonder Cordless Hot Glue Gun that fits on the Gridfinity system.

Ocena
0 / 5
Polubienia
15
Pobrania
25
Wydruki
1
Wyświetlenia
146
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Bill of Materials

Print Instructions

Print as normal, I printed in PLA and seems to be fine with the heat. I cut the model in my slicer along the point of contact with the hot glue gun so it would fit on my build plate; see cover image.

Build Instructions

First unscrew the old base and extract the electronics and the silicon pad. Assemble electronics in new frame, I put a little hot glue on the wires shown on the bottom so that the metal contacts stay in place in the stand. Current design limits how the silicon pad can be attached. Then the two parts simply screw together with M3 screws. 

Tagi