Surebonder Cordless Hot Glue Gun Upgraded Stand - Gridfinity
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An upgraded stand for the Surebonder Cordless Hot Glue Gun that fits on the Gridfinity system.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 25
- Makes
- 1
- Views
- 146
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Bill of Materials
4x M3 20mm Screws
Print Instructions
Print as normal, I printed in PLA and seems to be fine with the heat. I cut the model in my slicer along the point of contact with the hot glue gun so it would fit on my build plate; see cover image.
Build Instructions
First unscrew the old base and extract the electronics and the silicon pad. Assemble electronics in new frame, I put a little hot glue on the wires shown on the bottom so that the metal contacts stay in place in the stand. Current design limits how the silicon pad can be attached. Then the two parts simply screw together with M3 screws.