Illuminated Waterproof Button Front Cover for ESP32 4-Channel Relay Module Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix front cover for the ESP32 4-channel relay enclosure using 12mm illuminated waterproof buttons.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 226
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This remix replaces the original front panel and custom LED PCB with four 12 mm illuminated waterproof push buttons (3V–6V LED version). The buttons connect directly to the ESP32 GPIOs, while the LED rings use the relay GPIOs to indicate the relay status. It's a simpler build that requires no custom PCB and is ideal if you prefer off-the-shelf components.
Features
No custom LED PCB required
Uses standard 12 mm illuminated waterproof push buttons
Built-in LED ring indicates relay status
Same enclosure and ESPHome configuration as the original design
Perfect for workshop, garage, or outdoor installations
Note: This remix only includes the alternative front cover. All other enclosure parts are the same as the original project.
Complete build guide, wiring diagram, ESPHome firmware, and assembly instructions:
https://simplymaker.net/3d-printing/3d-print-esp32-4-channel-relay-module-enclosure/#waterproof-button