VW Univeral Phone Mount Plate (older models)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Universal backing plate for the VW Polo 9n, Golf 4, etc built-in phone holder
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a part to cleanly and securely mount a magsafe charger to the built-in phone holder. After trying out existing options, i wanted something hard-mounted, so i decided to remodel the original backing plate from scratch, to be able to screw anything into it directly.
No modifications to the original mount needed, just unscrew the two screws holding the original plate (last picture) and replace it.
Hardware required:
2x M3*6mm cap head hex socket screw
2x M3x5x4 heat set inserts
I recommend printing it in PETG, ABS or ASA, as PLA won't be able to take the heat of a hot car.
Recommended print settings:
15% gyroid infill
3 walls
3 bottom layers
5 top layers
0.16 resolution
For my use case scenario, i used https://www.printables.com/model/782969, cut it to my required specs and added the necessary holes directly in the slicer.
For anyone wanting to make their own/improve on my design, i have also attached the step file.