Graphic tablet sturdy stand over large keybord
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made a stand for my XP PEN deco 01 V3 so that I can put it above my keyboard. 180mm clearance for the keyboard !
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- CERN Open Hardware Licence Version 2 - Strongly Reciprocal
This stand accomodate for pretty much all keyboards I guess with its 180mm clearance between the feet.
Printed it in PETG then glued together. You have to miror one foot so that it makes for the other side. The pads are printed in transparent blue TPU 95A so it have a bit more grip (it should fit pretty snugly with 0.12mm clearance but you can still add a dab of glue, that is what I did). I added later some kind of non-slip pads that look awfull. My goal wasn't to make it that much beautiful but I would use something else if I was patient...