1 / 1
Ice cream maker motor gear replacement (H.Koenig hk250) — zdjęcie 1

Ice cream maker motor gear replacement (H.Koenig hk250)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

On my ice cream maker the motor was starting to slip gears. It is caused by a plastic gear that tend to go bad.

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
33
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a drop in replacement gear for the plastic one on my ice cream mixer. I pritned it in PETG on a X1C with a 0.4mm nozzle with good results. 

Some things to get in mind : 

The original design is made as it isn't easily printed on a FDM machine so I cut in another part the bottom standoff. You would just have to insert the standoff first on the shaft and then the gear. 

Even if I don't recommend it due to the brittleness of resin I also gave the non cut one to print it with this method. 

I would strongly suggest agains printing it with PLA as it would melt easilly. If you are able to, i would suggest you to fit a bronze rod inside to help creating a bearing. 

I don't know why I can't upload the F3D files but when fiugred out you will be able to edit shaft size to fit a 3mm bronze rod (ID). 

Tagi