Ice cream maker motor gear replacement (H.Koenig hk250)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
On my ice cream maker the motor was starting to slip gears. It is caused by a plastic gear that tend to go bad.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a drop in replacement gear for the plastic one on my ice cream mixer. I pritned it in PETG on a X1C with a 0.4mm nozzle with good results.
Some things to get in mind :
The original design is made as it isn't easily printed on a FDM machine so I cut in another part the bottom standoff. You would just have to insert the standoff first on the shaft and then the gear.
Even if I don't recommend it due to the brittleness of resin I also gave the non cut one to print it with this method.
I would strongly suggest agains printing it with PLA as it would melt easilly. If you are able to, i would suggest you to fit a bronze rod inside to help creating a bearing.
I don't know why I can't upload the F3D files but when fiugred out you will be able to edit shaft size to fit a 3mm bronze rod (ID).
