HAPE Quadrilla Roundabout
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a with blender self constructed roundabout. And it works. You can use it with or without the short lines under…
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 152
- Wydruki
- 2
- Wyświetlenia
- 987
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a with blender self constructed roundabout. And it works. You can use it with or without the short lines under it.
There are four different lines. Just where the murble should comes out.
You can use the short lines separately. Everywhere you will need a short bridge.
Pinting time for the roundabout is approx 37 hours.
I founded a group for the HAPE Quadrilla marble run: https://www.thingiverse.com/groups/hape-quadrilla-marble-run
Have a lot of fun.
Print Settings
Printer Brand:
Anycubic
Printer:
Predator
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
25%
Filament: Filamentwerk PLA red Post-Printing =============
Important for removing the supports
First demage the honeycombs under the support layer. Than remove the layer under the spiral.
Category: Construction Toys