HAPE Quadrilla Roundabout
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a with blender self constructed roundabout. And it works. You can use it with or without the short lines under…
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 152
- Makes
- 2
- Views
- 987
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a with blender self constructed roundabout. And it works. You can use it with or without the short lines under it.
There are four different lines. Just where the murble should comes out.
You can use the short lines separately. Everywhere you will need a short bridge.
Pinting time for the roundabout is approx 37 hours.
I founded a group for the HAPE Quadrilla marble run: https://www.thingiverse.com/groups/hape-quadrilla-marble-run
Have a lot of fun.
Print Settings
Printer Brand:
Anycubic
Printer:
Predator
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
25%
Filament: Filamentwerk PLA red Post-Printing =============
Important for removing the supports
First demage the honeycombs under the support layer. Than remove the layer under the spiral.
Category: Construction Toys