1 / 2
10-Inch 1U High-Airflow Rack Mount for BrosTrend S3 — zdjęcie 1
1 / 2

10-Inch 1U High-Airflow Rack Mount for BrosTrend S3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Custom 1U BrosTrend S3 mount for 10" racks. Open-back, max airflow.

Ocena
0 / 5
Polubienia
3
Pobrania
29
Wydruki
1
Wyświetlenia
84
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

BrosTrend S3 1U High-Airflow Rack Mount

This custom 1U rack mount integrates a fanless BrosTrend S3 switch into a 10-inch cabinet (Lanberg).

  • Maximum Ventilation: Large top and bottom cutouts expose 100% of the switch’s passive cooling grilles to open air.

  • Open-Back Design: Eliminates rear walls, allowing ethernet and power cables to route freely out the back.

  • Front Retaining Lips: Integrated stop-lips allow rear-loading while preventing the switch from sliding forward when cables are plugged in.

  • Friction Fit: The inner cavity is expanded to 143.4mm to counteract 3D-printer plastic shrinkage, ensuring a smooth, secure slide.

  • Optimized for printing flat on its faceplate, rotated 45 degrees diagonally, using 15% Gyroid infill and 5–6 walls for structural strength.

Made with OpenSCAD Playground

Tagi