1 / 3
Alfa Romeo 147 (937), Alfa 156, and Alfa GT rear sway bar bush 14mm — zdjęcie 1
1 / 3

Alfa Romeo 147 (937), Alfa 156, and Alfa GT rear sway bar bush 14mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a replacement rear sway bar (anti-roll bar) mounting bushing designed for the Alfa Romeo 147 (937), Alfa 156, an

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
63
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution
  • Inner Diameter: 14mm

  • Compatibility: This fits standard rear sway bars for most Alfa 147, 156, and GT models. Please verify your rear bar diameter with a caliper before printing, as some sport packs or aftermarket bars may use thicker diameters (like 16mm). [1, 2, 3]


⚙ Recommended Print Settings

Do not use rigid plastics like PLA, PETG, or ABS, as they will crack under suspension travel.

  • Filament: TPU (95A or 98A hardness). This matches the stiffness of aftermarket polyurethane bushings.

  • Infill Density: 100% Solid is required to withstand the clamping force and vehicle load.

  • Perimeters: 3 to 4 walls. Use a standard infill pattern at 100% rather than setting perimeters to 999, as the cross-hatch pattern improves overall part strength.

  • Supports: Not required if printed flat on its side profile.


Tagi