Alfa Romeo 147 (937), Alfa 156, and Alfa GT rear sway bar bush 14mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement rear sway bar (anti-roll bar) mounting bushing designed for the Alfa Romeo 147 (937), Alfa 156, an
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 63
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
Inner Diameter: 14mm
Compatibility: This fits standard rear sway bars for most Alfa 147, 156, and GT models. Please verify your rear bar diameter with a caliper before printing, as some sport packs or aftermarket bars may use thicker diameters (like 16mm). [1, 2, 3]
⚙ Recommended Print Settings
Do not use rigid plastics like PLA, PETG, or ABS, as they will crack under suspension travel.
Filament: TPU (95A or 98A hardness). This matches the stiffness of aftermarket polyurethane bushings.
Infill Density: 100% Solid is required to withstand the clamping force and vehicle load.
Perimeters: 3 to 4 walls. Use a standard infill pattern at 100% rather than setting perimeters to 999, as the cross-hatch pattern improves overall part strength.
Supports: Not required if printed flat on its side profile.