Gong HIPE First E-Foil mount for Flipsky 7070 motor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to convert Gong HIPE First inflatable foilboard into E-Foil
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Saw the E-foiling become more mainstream and decided to try it as a hobby. Bought the cheapest new board and tried to convert it into a E-Foil board. There aren't many builds with Flipsky 7070 motor, however in theory it should be suitable. As the motor controller is watercooled I added watercooling passage to the motor mount. There is a small gap between motor mount and mast, that needs to be filled with tape in order to prevent damage to mast or motor mount. Cooling works ok, even with low speed. I used 4 Makita LXT 18v batteries as the battery, but the output power is too low to get on plane. Only getting 1.2-1.5kW of power continuous and 1.8kW burst when trying to get on foil. I'll try to parallel 2 series of 4 batteries to get more current. 20S system is dangerous and can result in electric shock. Assemble the system at your discretion!
BOM:
Motor Mount Front x 1
Motor Mount Rear x 1
DIN 125 M4 washer A4 x 4
DIN 912 M4 x 70 A4 bolt x 4
6x9 PVC tube L=3000mm x 1
Flipsky 7070 motor x 1
Battery mount x 8
Battery holder x 4
Makita LXT battery terminals x 8
Flipsky 75100 x 1
Flipsky VX3 x 1
Flite prop x 1