1 / 4
Housing for esp32 cam — zdjęcie 1
1 / 4

Housing for esp32 cam

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A housing for an esp32 cam that can be attached to a wall and allows to tilt the camera on two axes.

Ocena
5 / 5
Polubienia
94
Pobrania
599
Wydruki
4
Wyświetlenia
4314
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial

 

Updated 27.03.2024

Pitch of the camera is now indexed in 8° steps.  

New files are marked with “27032024”

 

Updated 18.06.2022

Added wall bracket variant to use with micro usb breakout PCB.

 

Prinitng

  • Case front and wall bracket have to be printed with bed supports
  • All other parts are optimized to print w/o supports
  • Use finer layer height for better look of the case front (0.15 recommended)

Assembly

  • Figure out the orientation of the housing with respect to the swivel (at the moment esphome will not allow for image rotation, so rotate the housing appropriatly)
  • Drill a hole (3-4mm) for the wires in one of 4 spots on the sides of the case front part
  • Push wall bracket connector into wall bracket, this requires a bit of force
  • Run the wires, see the photo for reference
    • solder (or otherwise connect) the wires to esp32cam
    • place the esp32cam into case front, run the wires out of freshly drilled hole
    • run the writes through the case swivel
    • run the wires through wall bracket connector and then into the wall bracket
  • Assemble the housing
    • press the case swivel onto wall bracket connector
    • press case rear into case front
    • put the case front/rear assembly  into the case swivel

Installation

  • Use a 1-3 screws or two sided tape to attach wall mount to a wall (use a wall plug for drywalls etc.)
  • Hang the camera assembly onto the wall mount, it just slides on top.
  • Plug the power supply in and enjoy.

Tagi