Predator 212 nibbi carb intake manifold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Intake manifold for the predator 212 using a nibbi carb.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 554
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I designed 2 sizes. A longer one at 73mm and a short one at 63mm. Info online is 50/50 on which is better so I figured why argue and I'll let you guys decide on which one is better. Let me know how it works.
I would personally print from PA6-CF or some other kind of carbon filament for its heat and strength. I recommend at least ASA or ABS if you cant do carbon, with 8 walls if you want a solid center section.
I put my last name on the design, it has nothing to do with a Briggs and Stration engine.
Edit: I fixed the issue with BRIGGS not touching completely on the 73mm version.
Edit: the shorest i could go is 63mm, otherwise you could not install the hardware. Sorry about that to those of you that printed the 43mm one.