Predator 212 nibbi carb intake manifold
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Intake manifold for the predator 212 using a nibbi carb.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 99
- Makes
- 0
- Views
- 574
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I designed 2 sizes. A longer one at 73mm and a short one at 63mm. Info online is 50/50 on which is better so I figured why argue and I'll let you guys decide on which one is better. Let me know how it works.
I would personally print from PA6-CF or some other kind of carbon filament for its heat and strength. I recommend at least ASA or ABS if you cant do carbon, with 8 walls if you want a solid center section.
I put my last name on the design, it has nothing to do with a Briggs and Stration engine.
Edit: I fixed the issue with BRIGGS not touching completely on the 73mm version.
Edit: the shorest i could go is 63mm, otherwise you could not install the hardware. Sorry about that to those of you that printed the 43mm one.