4in Magnetic Flexible Hose Coupling
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Description 4 inch flexible hose magnet coupler with overprinted magnets.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 170
- Wydruki
- 0
- Wyświetlenia
- 1020
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Description
4 inch flexible hose magnet coupler. The magnets are overprinted so that they are completely embedded into the coupler. There is a 2 degree taper on the hose insert to allow it to slip on easier.
The STEP file is included.
Dimensions
Overall Height: 1.75 inches
Overall Width: 5.25 inches
Bill of Material
- 70g of a resilient filament
- 8 - 12mm x 3mm Neodymium Magents
Print Settings
Material: Hatchbox ABS
Vertical Perimeters: 4
Horizontal Perimeters: 5
Infill: 42%
Infill Type: Rectilinear
Printer Utilized: Voron 2.4
No supports or post processing is required
Overprint Instructions
The top of the magnet cavity is 4.2mm above the build plate, a print pause needs to be inserted at this point in the slicer to place the magnets.
- Slice the model
- In Superslicer or Prusa Slicer the layer menu can be utilized to add a pause in the print
- Slice the model again and send it to the printer
More detailed information about printer pauses from Prusa
Placing the Magnets
In order for two couplings to properly mate the magnet poles should alternate.
Custom Section
Print paused at 4.2mm
Alternate the magnet poles
Category: Tools