1 / 1
Snap-In Mosquito Bucket Trap Lid Spacers for 5-Gallon Buckets — zdjęcie 1

Snap-In Mosquito Bucket Trap Lid Spacers for 5-Gallon Buckets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Snap-in spacers for 5-gallon mosquito bucket traps. Easy to install, remove, and print in 3 heights.

Ocena
0 / 5
Polubienia
28
Pobrania
90
Wydruki
0
Wyświetlenia
958
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

These snap-in spacers are designed for making a simple 5-gallon bucket mosquito trap using water, vegetation clippings, and a mosquito dunk. This is a common DIY trap idea, but many of the spacer methods used online are clunky or awkward. I designed these 3D printed spacers to be cleaner, easier to use, and simple to remove when needed.

The spacers snap onto the rim of a standard 5-gallon bucket and hold the lid slightly raised, allowing mosquitoes to enter while keeping the setup neat and secure. They snap in place and hold well, but they are still easy to remove.

I created three different spacer heights so you can choose the gap that works best for your bucket, lid, and trap setup.

For installation, the easiest method is to place the spacers into the lid first, then snap the lid and spacers onto the bucket at the same time.

I used four spacers per bucket, but you may be able to use three, or as many as you prefer depending on how stable you want the lid to be.