Snap-In Mosquito Bucket Trap Lid Spacers for 5-Gallon Buckets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Snap-in spacers for 5-gallon mosquito bucket traps. Easy to install, remove, and print in 3 heights.
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 89
- Makes
- 0
- Views
- 956
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These snap-in spacers are designed for making a simple 5-gallon bucket mosquito trap using water, vegetation clippings, and a mosquito dunk. This is a common DIY trap idea, but many of the spacer methods used online are clunky or awkward. I designed these 3D printed spacers to be cleaner, easier to use, and simple to remove when needed.
The spacers snap onto the rim of a standard 5-gallon bucket and hold the lid slightly raised, allowing mosquitoes to enter while keeping the setup neat and secure. They snap in place and hold well, but they are still easy to remove.
I created three different spacer heights so you can choose the gap that works best for your bucket, lid, and trap setup.
For installation, the easiest method is to place the spacers into the lid first, then snap the lid and spacers onto the bucket at the same time.
I used four spacers per bucket, but you may be able to use three, or as many as you prefer depending on how stable you want the lid to be.