Encore Direct Drive (Sherpa Mini)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slight Modification of the main carriage body and Print fan duct shroud to accommodate the Sherpa Mini
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Encore Sherpa Mini Direct Drive
I tried to keep the design within the original constraints, but it does decrease the X movement by 6mm on either side, as the Sherpa body is wider than the toolhead itself.
I'd planned around the EBB36 toolhead board.
The Print Carriage Winglets are designed to use M3 Heat Inserts, but you could use hex nuts with a longer M3 bolt through to the underside.
As a bonus, the centre bolt securing the fan shroud is no longer needed as it is now secured by the Sherpa mount bolts.
No other changes were made; slice and print as per Alex's print settings. I put a modifier cylinder in each winglet to up the wall count to 4-5 for maximum Heat Insert Grip.