Encore Direct Drive (Sherpa Mini)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slight Modification of the main carriage body and Print fan duct shroud to accommodate the Sherpa Mini
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 7
- Makes
- 0
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
Encore Sherpa Mini Direct Drive
I tried to keep the design within the original constraints, but it does decrease the X movement by 6mm on either side, as the Sherpa body is wider than the toolhead itself.
I'd planned around the EBB36 toolhead board.
The Print Carriage Winglets are designed to use M3 Heat Inserts, but you could use hex nuts with a longer M3 bolt through to the underside.
As a bonus, the centre bolt securing the fan shroud is no longer needed as it is now secured by the Sherpa mount bolts.
No other changes were made; slice and print as per Alex's print settings. I put a modifier cylinder in each winglet to up the wall count to 4-5 for maximum Heat Insert Grip.