Hexagon Car Tire Valve Stem Cap Hex
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hexagon is bestagon! Simple hexagonal valve stem cap.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I purchased a set of used wheels that came with metal valve stems, but did not have the metal valve stem caps. The company charges $20 for each valve stem, and does not sell the caps separately. So I made a valve stem cap that closely matches the original. They've been holding up just fine.
This part is designed to be printed in ASA. I simply do not trust PLA or PETG for outdoor temperatures, let alone touching the wheel of your car (you'd be surprised how hot the wheel gets from the brakes!) I printed several to get the right "fit."
Recommended print settings:
Bottom layer infill pattern: Concentric
Walls: Yes (I did 6 in the 3mf)
Infill: 100%, concentric
Speed: Slow! I did not exceed 60mm/s on this print, it prints fast enough being so small! Reduce travel speed to prevent parts from being jerked around.
Layer height: I did 0.12mm, but 0.1 or 0.16 is probably fine. It may affect the "fit"
Brim: Yes