1 / 4
Clamp PEI plate BBL P1S/P2S/X1S — zdjęcie 1
1 / 4

Clamp PEI plate BBL P1S/P2S/X1S

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clamp clamping the plate to the bed

Ocena
0 / 5
Polubienia
3
Pobrania
34
Wydruki
0
Wyświetlenia
129
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Printing with materials with high shrinkage is challenging. Even if you've managed to control the plastic's adhesion to the plate, it doesn't mean the print will go smoothly.

Large parts firmly glued to the bed can pull the plate away from the magnetic base.

I've been using mini clamps to secure the plate to the bed base for a long time.

Printing Recommendations

Screw - ABS 3/35% (vertical)

Base - PPS-СF / PPA-СF 4/35% (on its side)

Why PPS-SF / PPA-SF? Long-term printing at a bed temperature of 100+ degrees can soften the ABS/ASA/PS, making the clamp inoperative.