1 / 4
Clamp PEI plate BBL P1S/P2S/X1S
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clamp clamping the plate to the bed
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 34
- Makes
- 0
- Views
- 129
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printing with materials with high shrinkage is challenging. Even if you've managed to control the plastic's adhesion to the plate, it doesn't mean the print will go smoothly.
Large parts firmly glued to the bed can pull the plate away from the magnetic base.
I've been using mini clamps to secure the plate to the bed base for a long time.
Printing Recommendations
Screw - ABS 3/35% (vertical)
Base - PPS-СF / PPA-СF 4/35% (on its side)
Why PPS-SF / PPA-SF? Long-term printing at a bed temperature of 100+ degrees can soften the ABS/ASA/PS, making the clamp inoperative.
