Dominion Holder Spines (Used with Center-Locking Card Holders)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spines to keep the card holders together when they are in storage.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These models are spines to keep the card holders together when they are in storage.
The original card holder models are here:
I created a variety of lengths so you can mix/match depending on your storage solutions.
- Spine 122mm (10x 14mm holders)
- Spine 62mm (5x 14mm holders)
- Spine 50mm (4x 14mm holders)
I found having 2x 32m + 1x 22mm + 1x 14mm works well for money (copper=32mm, silver=32mm, gold=22mm, plat=14mm), so there's a spine to hold those:
- Spine 94mm (2x32mm_1x22mm_1x14mm)
---
If you noticed that 122 != 14 x 10, that's because these holders stack/overlap by 2mm a piece, so the actual length is (H¹ + H² ...) - ((N-1) x 2), where Hˣis the height of the individual holders, and N is the total number of holders that will be held together by a spine.
So, for 10x 14mm holders, it looks like(14 x 10) - ((10-1) x 2)
simplified to:140 - (9 x 2) == 140 - 18 == 122