1 / 2
Dominion Holder Spines (Used with Center-Locking Card Holders) — image 1
1 / 2

Dominion Holder Spines (Used with Center-Locking Card Holders)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Spines to keep the card holders together when they are in storage.

Rating
0 / 5
Likes
1
Downloads
4
Makes
0
Views
37
Reviews
0

Updated at source:

Model information

Category
Board Games
License
Creative Commons — Attribution — Noncommercial — Share Alike

These models are spines to keep the card holders together when they are in storage. 

The original card holder models are here:



I created a variety of lengths so you can mix/match depending on your storage solutions.

- Spine 122mm (10x 14mm holders)
- Spine 62mm (5x 14mm holders)
- Spine 50mm (4x 14mm holders)

I found having 2x 32m + 1x 22mm + 1x 14mm works well for money (copper=32mm, silver=32mm, gold=22mm, plat=14mm), so there's a spine to hold those:

- Spine 94mm (2x32mm_1x22mm_1x14mm)

---

If you noticed that 122 != 14 x 10, that's because these holders stack/overlap by 2mm a piece, so the actual length is (H¹ + H² ...) - ((N-1) x 2), where Hˣis the height of the individual holders, and N is the total number of holders that will be held together by a spine.

So, for 10x 14mm holders, it looks like

(14 x 10) - ((10-1) x 2)

simplified to:

140 - (9 x 2) == 140 - 18 == 122

Tags