1 / 3
Air scoop for 1:8 Arrma Typhon 3s platform. — zdjęcie 1
1 / 3

Air scoop for 1:8 Arrma Typhon 3s platform.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A front air scoop for 1:8 Arrma Typhon 3s platform.

Ocena
0 / 5
Polubienia
7
Pobrania
31
Wydruki
0
Wyświetlenia
148
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I made a front air scoop for 1:8 Arrma Typhon 223s but it will fit any typhon with the same shell shape. I found that the 223s ran quite hot running on 3s, this scoop makes a very noticable difference in motor temperature after a long run. I used some m3 bolts and nuts to secure it, use the inner part as a guide to mark before cutting the shell and drilling the holes. Sandwich the shell between the two parts and bolt it up! If you want to stop dust getting in, glue some fine mesh fabric or metal to the inner part before bolting on.

Mine is printed in PA12-CF because i had some to use up. But probably be better in TPU so it bends instead of breaking on heavy impacts. Although i havent broken mine yet. 

Tagi