Monk mod: Monitor interconnector + options
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Monk mod: Monitor interconnector + options
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 832
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Monk mod: Monitor interconnector to keep your displays leveled to each other adding additional options like a shelf or other add ons too…
Background to this model:
I still really like my 2 LG UHD 27” monitors. Together with this dual monitor holder they work great at my standing desk with my Mac and 2 mini PC computers.
The only thing I really do not like (if not to say: I hate it!!!) because of my inner Monk, is that the 2 monitors are not kept leveled to each other and look crooked all the time because of this:

Several times per day I find myself putting them in the leveled orientation again:

just to loose this leveled status after 1x putting the desk up or down again:

This super serious 1st world problem has to end now... Finally… =)
Therefore I made this monitor interconnector to keep the monitors leveled in place all the time. From the front you can only see the small black parts acting as a clamp with a full length bar in the back of the monitors. I used this foam adhesive in advance to keep them in place even better and prevent the monitors from scratching in the back:


Already the first try worked fine to reach the goal and the before flimsy holder is now working as requested…
The monitor interconnector is kept together with up to 12x M4x14mm screws and 12x M4 nuts. I used 8 of the 12 possible ones only which is sturdy enough. Mounting this should be self explaining…


After this I looked at my webcam you can see in the pictures above and asked myself if I can solve one other super unimportant problem too, that the webcam holder of this Logitech C920 always is a bit in the picture of the monitor…
Now that we have a stable bar behind the exact middle of the 2 monitors not expected options raise on the horizon… Long story short: I added a shelf to the top of the bar with 2x M4x20mm cylinder head screws which adds a good amount of space above the monitors which is fixed super sturdy to the new bar:




On top of the shelf the webcam can find its new home now too, to improve the monitor usage even more. =)
Some more options might be useful and added soon, when I have some more ideas… Already thinking of adding a wireless charger for my iPhone to the still not used space below the monitors…
Because I already use this model and I do not see me printing another one, plus super secure given your own monitors will have other dimensions I have added the .step file of the model to adjust it to your needs. Maybe you want to share your add ons for other users too… =)
Adjusting to your monitors (given you use 2x the same monitor model):
Simply measure the height of the monitors which leads to the inner length of the whole shown parts below.
Measure the thickness of the monitors on the first 15mm of the upper and lower edge to interconnect back to front part which leads to the inner vertical height until the clamping hook you can later see from the monitor fronts.
Change the model to these measurements and print it to get a first try. You can simply cut the clamping parts to raise or reduce the length needed to set it to your environment.
Add the M4 nuts and screws after printing and optionally add the named foam adhesive.
Attach the interconnector to the monitors.

Printing instructions
0.2 speed profile
No brim
No supports
Optional fuzzy skin
Happy printing =)