1 / 4
Rubber (TPU) Foot, Bumper, Pad, Appliance Foot 15mm - easily scaled for other sizes — zdjęcie 1
1 / 4

Rubber (TPU) Foot, Bumper, Pad, Appliance Foot 15mm - easily scaled for other sizes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A soft "foot" that screws (or glues) in the bottom of a box, etc.

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
13
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

An old cylinder type phonograph I am refurbishing needed replacement "feet"  - see the cover photos for one of the old totally worn out feet and its replacement. I didn't want to use commercial nail type rubber feet, so I printed my own so I could screw them into to the old nail holes left by the old feet. I used M2 X 10mm Phillips pan head self-tapping wood screws.

I made these in a 15mm maximum diameter, but the simple design could be readily scaled to make larger or smaller feet.

Assembly and Use

Partially screw the M2 screw into the foot, so the end of the screw can be used to register the foot over the old nail hole (or drill a pilot hole for a new install). Finish by tightening the screw - just needs to be firm, no need to go crazy on it.

Print Instructions

Print in FLEX (TPU) using the 3mf files provided, otherwise :

  • 0.2mm layer height

  • 5 perimeters

  • 50% concentric infill

  • Concentric top and bottom layers

I used transparent TPU, just because it was what I had on hand. 

CAD

The OnShape 3D CAD files for this are here :

https://cad.onshape.com/documents/08e914be30962f73adb62b0f/w/391f36499e66dd686ce726da/e/10c90cd7e383c28ac5d31038?renderMode=0&uiState=6a46f98d7f17e7854bbe1eb8