Rubber (TPU) Foot, Bumper, Pad, Appliance Foot 15mm - easily scaled for other sizes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A soft "foot" that screws (or glues) in the bottom of a box, etc.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 13
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
An old cylinder type phonograph I am refurbishing needed replacement "feet" - see the cover photos for one of the old totally worn out feet and its replacement. I didn't want to use commercial nail type rubber feet, so I printed my own so I could screw them into to the old nail holes left by the old feet. I used M2 X 10mm Phillips pan head self-tapping wood screws.
I made these in a 15mm maximum diameter, but the simple design could be readily scaled to make larger or smaller feet.
Assembly and Use
Partially screw the M2 screw into the foot, so the end of the screw can be used to register the foot over the old nail hole (or drill a pilot hole for a new install). Finish by tightening the screw - just needs to be firm, no need to go crazy on it.
Print Instructions
Print in FLEX (TPU) using the 3mf files provided, otherwise :
0.2mm layer height
5 perimeters
50% concentric infill
Concentric top and bottom layers
I used transparent TPU, just because it was what I had on hand.
CAD
The OnShape 3D CAD files for this are here :