ViewSonic ViewBoard Remote & Stylus Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic holder for a ViewSonic ViewBoard remote and styluses. Classroom tested for years.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Magnetic ViewSonic ViewBoard Remote & Stylus Holder
After years of misplacing the remote in my classroom, I designed this holder to keep everything in one convenient location. I've been using it daily in my middle school technology & engineering labs for several years, and it has held up great.
The holder keeps the ViewSonic ViewBoard remote and styluses within easy reach. It attaches magnetically to the whiteboard, making it easy to reposition without adhesives or screws, so it stays off desks and is always where you need it.
Features
Holds one ViewSonic ViewBoard remote
Holds multiple ViewBoard styluses
Magnetic mounting allows easy repositioning
Designed for everyday classroom use
Includes STL, STEP, and 3MF files
Printing
Print with the bottom face on the build plate.
Organic supports are recommended for the best results.
Standard print settings work well (0.2 mm layer height recommended).
Hardware
This model is designed for 6 mm × 3 mm neodymium magnets, which can be press-fit into the magnet pockets on the back of the holder. If your printer produces slightly looser tolerances, a small amount of CA glue or epoxy will securely hold the magnets in place.
If you find this model useful in your classroom or office, I'd love to see your make!