SIMRIG Soundbar shelf | 4040 & 8040 compatible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Useful to mount a soundbar to your SIMRIG or any other piece of 4040 / 8040 extrusion
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Soundbar Mount for 4040 / 8040 Extrusion
This shelf mount lets you attach a soundbar to your sim rig or any other piece of 4040 / 8040 aluminum extrusion. All you need are velcro straps to secure the soundbar to the shelf.
Dimensions
File | Dimensions |
|---|---|
side_1.stl / side_2.stl | 110 mm × 200 mm × 60 mm |
middle_200.stl | 110 mm × 200 mm × 10 mm |
middle_150.stl | 110 mm × 150 mm × 10 mm |
middle_100.stl | 110 mm × 100 mm × 10 mm |
Print Instructions
Required Parts
1x side_1.stl
1x side_2.stl
2x pin.stl per connection (each pin is split in two halves, you need two pin.stl prints to make one complete pin)
As many middle_xxx.stl pieces as you need, use the 200 mm, 150 mm, or 100 mm variants to reach your desired shelf width. Keep in mind that the shelf will loose stability the longer it is.
Print Settings
Print with additional wall loops for extra strength. I tested using 6 wall loops (Bambu Studio 0.2 mm Strength preset). No supports required.
Build Instructions
Use the printed pins to assemble the shelf sections together.
Glue the seams for additional strength.
Secure your soundbar to the shelf using velcro straps.
Bonus Tip
The mount also works without the middle pieces, if your soundbar is long enough to bridge the gap.