1 / 2
Mobile Air Conditioner Intake Funnel (for dual hose-conversion) (150 mm hoses) — zdjęcie 1
1 / 2

Mobile Air Conditioner Intake Funnel (for dual hose-conversion) (150 mm hoses)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Funnel/cover for connecting an intake hose to an one hose mobile air conditioner to e.g. a window cover.

Ocena
0 / 5
Polubienia
7
Pobrania
61
Wydruki
0
Wyświetlenia
428
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

The funnel can be used on several of the cheaper mobile air conditioners that are out there that use a single hose for venting the compressor. It features a slightly wider base that allows it to be secured to the intake cover using e.g. double-sided tape and a lip on the inside of the cylindrical part to hold the hose in place.

The model is slightly too large to print it in one piece on a Prusa Core One, so I added six "eyelets" that can be used to connect a center-sliced unit using M3 srews. The installation of the hose is even easier that way.
Use some tape or glue to seal the seam between the halves.

BE SURE TO USE THE FUNNEL ON THE CORECT INTAKE TO CREATE A CLOSED LOOP! (it's usually the lower one)

I recommend using PETG, but PLA should work just fine.

For me, installing the cover (and a second hose) reduced the noise of the AC, massively reduced the buildup of negative pressure and made it perform slightly better.

Tagi