1 / 4
Antifog 90 degree adapter presupported and no support — zdjęcie 1
1 / 4

Antifog 90 degree adapter presupported and no support

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Airsoft antifog silicone hoses tend to kink on tight turns. This solves this issue

Ocena
0 / 5
Polubienia
0
Pobrania
13
Wydruki
0
Wyświetlenia
68
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

There are other models of this but I wasn't really happy with printing them. Even when using really optimized supports or printing split and gluing them the solution is usually subpar. I decided to design my own. There's a pre supported and normal version. If you're printing in PLA or PLA+ my recommendation is using the pre-supported model. For other materials I can't make any recommendations.

Pre-supported:
The pre-supported version needs to be printed with a brim. I recommend around 5mm.
WARNING: THIS REQUIRES WELL CALIBRATED PRINTER AND MATERIAL.
But it's worth if for the finish and lack of post processing.

Normal model:
My only recommendation here is to use supports from this reddit post: https://www.reddit.com/r/OrcaSlicer/comments/15yjz2a/best_tree_support_settings_ive_used/#lightbox

Use a lighter to burn off the wisps from printing and reshape any deformities on overhangs

Tagi