1 / 2
Victorinox 74mm Pen Scales for Executive or Ambassador — zdjęcie 1
1 / 2

Victorinox 74mm Pen Scales for Executive or Ambassador

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

I originally designed these scales because finding a replacement pen scale for the 74mm SAK line was nearly impossible. This project provides fully 3D-printable replacement scales that add a ton of utility to your knife.


You can modify these models using the OpenSCAD source code in my GitHub repo:
https://github.com/ftoralesacosta/swiss_army_knife_74mm_scales




Key Features

  • Pen Scale Mod: The front scale is designed to accept a pressurized pen insert taken from a standard 58mm Victorinox scale.

  • Pocket Clip Integration: An optional version of the front scale features mounting holes specifically spaced for a CIVIVI Deep Pocket Carry Clip.

  • Classic Accessories: The rear scale is equipped with two standard accessory slots to house your classic Victorinox toothpick and tweezers.

  • Open Source: Includes both ready-to-print .stl files and the original .scad (OpenSCAD) code.



    Print Settings

  • Printer: FDM or Resin (Resin SLA is highly recommended for the best detail and smooth finish, but a well-tuned FDM printer will work fine!)

  • Rafts: No

  • Supports: Yes (Recommended for the accessory slots and clip overhangs depending on your print orientation)

  • Resolution: 0.12mm layer height or finer (due to the small snap-fit tolerances)

  • Infill: 100%

  • Filament/Material: PETG, ABS, or Tough Resin recommended. (PLA can be used, but PETG/ABS or tough resins are highly preferred for durability, impact resistance, and a secure snap-fit onto the brass pins).

Tagi