1 / 2
Victorinox 74mm Pen Scales for Executive or Ambassador — image 1
1 / 2

Victorinox 74mm Pen Scales for Executive or Ambassador

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Model information

Category
Tools
License
Creative Commons — Attribution

I originally designed these scales because finding a replacement pen scale for the 74mm SAK line was nearly impossible. This project provides fully 3D-printable replacement scales that add a ton of utility to your knife.


You can modify these models using the OpenSCAD source code in my GitHub repo:
https://github.com/ftoralesacosta/swiss_army_knife_74mm_scales




Key Features

  • Pen Scale Mod: The front scale is designed to accept a pressurized pen insert taken from a standard 58mm Victorinox scale.

  • Pocket Clip Integration: An optional version of the front scale features mounting holes specifically spaced for a CIVIVI Deep Pocket Carry Clip.

  • Classic Accessories: The rear scale is equipped with two standard accessory slots to house your classic Victorinox toothpick and tweezers.

  • Open Source: Includes both ready-to-print .stl files and the original .scad (OpenSCAD) code.



    Print Settings

  • Printer: FDM or Resin (Resin SLA is highly recommended for the best detail and smooth finish, but a well-tuned FDM printer will work fine!)

  • Rafts: No

  • Supports: Yes (Recommended for the accessory slots and clip overhangs depending on your print orientation)

  • Resolution: 0.12mm layer height or finer (due to the small snap-fit tolerances)

  • Infill: 100%

  • Filament/Material: PETG, ABS, or Tough Resin recommended. (PLA can be used, but PETG/ABS or tough resins are highly preferred for durability, impact resistance, and a secure snap-fit onto the brass pins).

Tags