DJI Osmo Pocket 3 Cute Bunny Ears Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Give your DJI Osmo Pocket 3 a super cute pair of Bunny Ears！
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a custom-designed gimbal extension/cap for the DJI Osmo Pocket 3, entirely designed by myself from scratch. It snaps on perfectly, adding a playful and adorable touch to your camera setup while keeping it stylish.
🔥 Tested & Fully Functional Guarantee:
Compatible with Original Case: No storage hassle! With this bunny cap on, your Pocket 3 can fit directly back into its original DJI protective slot/case. No need to take it off and on constantly, making it super convenient for daily travel!
Flawless Performance: To achieve the perfect fit, I have personally tested, refined, and iterated this design multiple times. Rest assured, this final version will NOT affect any of the camera's original functions. It perfectly avoids the gimbal's rotation paths, ensuring both the gimbal and the camera operate smoothly without any interference during power-ons, shut-downs, or movements. It won't trigger any motor overload errors or block the rotating screen!
Printing Tips:
Multi-color: Designed for the Bambu AMS system (Black & White).
Slicing Recommendations:
To avoid color bleeding, please increase the Flushing Volume (Black To White) to 250–300 in Bambu Studio.
Prime Tower is highly recommended to ensure stable nozzle pressure after filament changes.
Set Wall Loops to 3 and disable "Flush into infill" to prevent the dark infill from showing through the white parts.
Make sure the ears are perfectly aligned flat to the print bed for the cleanest finish.