1 / 1
AMT Lightning Magazine Baseplate — zdjęcie 1

AMT Lightning Magazine Baseplate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

AMT‑inspired baseplate remix with recessed logo and chord texture; prints cleanly in ABS at 0.1 mm.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
11
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

AMT‑Inspired Lightning Baseplate (Remix)

A functional, modernized tribute baseplate designed for AMT Lightning magazines. This remix is based on the Public Domain Ruger MKII Magazine Base STL by CheT @CheT_1029040, which explicitly allows sharing, modification, and commercial use. The original file provided a solid dimensional foundation; all top‑side geometry has been redesigned.

What’s Changed in This Remix

  • AMT‑style_logo_recess — Added a recessed AMT‑inspired swirl and lettering, intentionally non‑OEM and slightly underset to prevent wear.

  • Archimedean_Chords_surface — Replaced the flat top with a modern curved‑flow texture that complements the logo and hides layer lines.

  • ABS_friendly_geometry — Adjusted top‑face transitions and recess depth for crisp detail at 0.1 mm layer height.

  • Seam_hiding_behavior — Geometry encourages slicers to bury the seam in an internal corner for a clean exterior.

  • Lightning_mag_fit — Tuned underside tolerances for AMT Lightning magazines while retaining the original STL’s general footprint.

Why This Remix Exists

  • Magazine_identification — Helps differentiate Lightning mags from MK‑series mags at the range.

  • Tribute_not_replica — AMT‑adjacent aesthetic without copying OEM tooling or trademarks.

  • Range_ready_design — Recessed lettering stays crisp; top face takes the wear.

  • Print_efficiency — Prints in ABS for about six cents of material.

Included Files

  • Remix_STL — Clean, printable geometry with recessed logo and chord texture.

  • Core_One_plus_GCODE — Optional: fully sliced 0.1 mm ABS file with ironing enabled for a satin, molded‑polymer finish.

Print Recommendations

Each item begins with a Guided Link.

  • 0.1_mm_layers — Captures fine detail in the logo and background texture.

  • Ironing_enabled — Produces a smooth, OEM‑adjacent top face.

  • ABS_or_ASA — Best balance of strength, finish, and heat resistance.

  • 6_perimeters — Provides rigidity without excess material.

  • 50% Combined Infill,  — Provides strength without wasting material

Tagi